Do Protektive Pak In-Plant Handlers need to have lids on while ESD sensitive items are in them? How do these Protektive Pak In-Plant Handlers work?
Outside the ESD protected area (EPA), the Protektive Pak lids need to be in place to provide the electrostatic discharge shielding ESD control property which is required by the Packaging standard ANSI/ESD S541. Per section 6.2 Outside an EPA “Transportation of sensitive products outside of an EPA shall require packaging that provides: 1. Low charge generation. 2. Dissipative or conductive materials for intimate contact. 3. A structure that provides electrostatic discharge shielding.”
Inside the EPA, it would still be a good idea to have the lid in place, but it is not a requirement. The Protektive Pak impregnated corrugated has a buried shielding layer. In shielding, we utilize the fact that electrostatic charges and discharges take the path of least resistance. The charge will be either positive or negative; otherwise the charge would balance out and be no charge.
Like charges repel and so the electrostatic charge will reside on the outer conductive surface.
A Faraday Cage effect can protect ESDS contents in a container with a shielding layer (this is what a shielding bag has). This Faraday Cage effect protects people in real life when a lightning bolt strikes an airplane or automobile with the charge residing on the outer metal fuselage or car body.
The Faraday cage effect causes charges to be conducted around the outside the surface of the conductor. Since like charges repel, charges will rest on the exterior.
To complete the enclosure, make sure to place lids on boxes or containers, and close shielding bags. Packaging with holes, tears, or gaps should not be used as the contents may be able to extend outside the enclosure and lose their shielding as well as mechanical protection.
To ask an ESD question Click Here
To view In-Plant Handlers Click Here
Posted on April 16, 2012, in Corrugated Storage Containers, ESD Information, ESD Tips, In-Plant Handler, Question & Answers and tagged ANSI/ESD S541, Buried Shielding Layer, Electrostatic Charges, EPA, ESD Protected Area, Faraday Cage, Impregnated Corrugated. Bookmark the permalink. Leave a comment.